How to remove the brake light switch for a Subaru Impreza?

Disconnect the negative battery terminal and remove the brake light switch's electrical connector. Rotate the switch counterclockwise and pull it from the gray clip. Make sure the gray clip is secure and insert the brake light switch until it hits the stopper. Rotate the switch clockwise, and check for 0.5 to 2 mm of play at the switch tip. Plug the connector and battery then check the brake lights.

Genuine Subaru Impreza Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Brake Light Switches found

View related parts
Subaru Impreza Stop Lamp Switch
Part Number: 83370AA001
$37.90 MSRP: $54.93
You Save: $17.03 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: P1010796 Stop Lamp Switch ; Switch-Stop Lamp; Stoplamp Switch
- Replaces: 83370AA010, 83370AA000
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2000-2007 Subaru Impreza | 25i, Outback, Outback Sport, RS, STI, STI Limited, TS, WRX, WRX TR | 2.0L H4 Turbo, 2.2L H4 Series, 2.5L H4, 2.5L H4 SOHC, 2.5L H4 Turbo
- 1993-1996 Subaru Impreza | L, LS, LX, Outback | 1.8L H4, 2.2L H4
View related parts
Subaru Impreza Stop Lamp Switch
Part Number: 83311AL00A
$42.35 MSRP: $61.38
You Save: $19.03 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch-Stop Lamp; Stoplamp Switch
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2017-2021 Subaru Impreza | Base, Limited, Premium, Sport
View related parts
Subaru Impreza Stop Lamp Switch
Part Number: 83311FG000
$14.41 MSRP: $20.88
You Save: $6.47 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch-Stop Lamp; Stoplamp Switch
- Manufacturer Note: FOR LED
- Replaced by: 83311FG001
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2008-2011 Subaru Impreza | 2.5 GT, 2.5i, Outback Sport, STI, STI Special Edition, WRX, WRX Sport, WRXSS | 2.5L H4, 2.5L H4 Turbo
View related parts
Subaru Impreza SWITCH STOP LP
Part Number: 83311AL011
$60.80 MSRP: $88.12
You Save: $27.32 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaces: 83311AL010
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2022-2025 Subaru Impreza | 4 Cyl 2.0L, 4 Cyl 2.0L 5MT, 4 Cyl 2.5L
View related parts
Subaru Impreza SWITCH STOP LP
Part Number: 83311AN00B
$42.33 MSRP: $61.35
You Save: $19.02 (31%)
ADD TO CART
Product Specifications
- Replaces: 83311AN00A
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2022-2023 Subaru Impreza | 4 Cyl 2.0L CVT
View related parts
Subaru Impreza Stop Lamp Switch
Part Number: 83311AA011
$16.10 MSRP: $23.33
You Save: $7.23 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch-Stop Lamp; Stoplamp Switch
- Replaces: 83311AA010
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1993-2003 Subaru Impreza | Base, Brighton, L, L+, LE, LX, Outback, RS, TS | 1.8L H4, 2.2L H4, 2.2L H4 (New EVAPO), 2.2L H4 Series, 2.5L H4, 2.5L H4 DOHC, 2.5L H4 SOHC
View related parts
Subaru Impreza Stop Lamp Switch
Part Number: 83311AL010
$60.80 MSRP: $88.12
You Save: $27.32 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Stop Lp
- Replaced by: 83311AL011
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2019-2021 Subaru Impreza | Base, Premium, Sport
View related parts
Subaru Impreza Brake Light Switch Compatible
Part Number: 83311AA010
$16.10 MSRP: $23.33
You Save: $7.23 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Stop Lamp Switch Stopper ; Switch-Stop Lamp
- Replaced by: 83311AA011
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1993-1994 Subaru Impreza | Base, L, L+, LE | 1.8L H4
View related parts
Subaru Impreza Stop Lamp Switch
Part Number: 83370AA000
$37.90 MSRP: $54.93
You Save: $17.03 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch-Stop Lamp
- Replaced by: 83370AA001
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1993-1995 Subaru Impreza | LS, LX | 1.8L H4, 2.2L H4
View related parts
Subaru Impreza Brake Stop Light Lamp Switch
Part Number: 83311FJ001
Product Specifications
- Other Name: Switch Stop Lp Bul ; Switch-Stop Lamp; Stoplamp Switch
- Replaces: 83311FJ000, 83311FG010, 83311FG011
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2008-2016 Subaru Impreza | 2.5 GT, 2.5i, Base, Limited, Premium, Sport, Sport Limited, STI Special Edition, STI Sport, WRX, WRX Sport, WRXSS | 2.5L H4, 2.5L H4 Turbo
View related parts
Subaru Impreza Stop Lamp Switch
Part Number: 83311FJ000
Product Specifications
- Other Name: Switch Stop Lp Bul ; Switch-Stop Lamp
- Replaced by: 83311FJ001
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2014-2016 Subaru Impreza | Base, Limited, Premium, Sport, Sport Limited
View related parts
Subaru Impreza Stop Lamp Switch
Part Number: 83311FG011
Product Specifications
- Other Name: Switch Stop Lamp Bulb ; Switch-Stop Lamp
- Manufacturer Note: FOR BULB
- Replaced by: 83311FJ001
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2008-2014 Subaru Impreza | 2.5 GT, 2.5i, Base, Limited, Premium, Sport, Sport Limited, STI Special Edition, STI Sport, WRX, WRX Sport, WRXSS | 2.5L H4, 2.5L H4 Turbo
View related parts
Subaru Impreza Stop Lamp Switch
Part Number: 83311FG010
Product Specifications
- Other Name: Switch-Stop Lamp
- Manufacturer Note: FOR BULB
- Replaced by: 83311FJ001
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2008 Subaru Impreza | 2.5i, WRX, WRX Sport | 2.5L H4, 2.5L H4 Turbo

Subaru Impreza Brake Light Switch

The rear brake lamps illuminate when the brake pedal is pressed, thanks to the Subaru Impreza Brake Light Switch, which warns other vehicles that you are slowing or stopping. The Brake Light Switch is situated on a bracket under the dash of the Subaru Impreza. It works by breaking or making an electrical circuit as the contact point changes with pedal movement on the brake pedal arm. When the pedal is at rest, the circuit remains open. When the pedal is pressed, it is closed and the lamps light up immediately. The Brake Light Switch housing features a direct mechanical connection with the pedal, which uses a spring-loaded plunger to achieve electrical continuity. A molded connector routes current from the Brake Light Switch to rear lighting wiring. A threaded section allows the factory to set the distance between the switch tip and pedal arm for precise operation. The Brake Light Switch ensures proper operation of the tail lamps across all Subaru Impreza vehicles and contributes to the proper functioning of an array of essential safety features.

Our website stands as the go-to online destination for OEM Subaru Impreza Brake Light Switch. With complete lines of genuine Subaru Impreza Brake Light Switch available at unbeatable market prices, we ensure top quality, reliability, and durability. Each part comes backed by the manufacturer's warranty, reinforcing your trust in our offerings.

Subaru Impreza Brake Light Switch Parts Questions & Experts Answers

Stop Lamp Switch
83370AA001
Q: How to remove the brake light switch for a Subaru Impreza?
A:
Disconnect the negative battery terminal and remove the brake light switch's electrical connector. Rotate the switch counterclockwise and pull it from the gray clip. Make sure the gray clip is secure and insert the brake light switch until it hits the stopper. Rotate the switch clockwise, and check for 0.5 to 2 mm of play at the switch tip. Plug the connector and battery then check the brake lights.