My Garage
Cart

Genuine Subaru Impreza STI Body Mount Hole Plug

  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Body Mount Hole Plugs found

  • Diagram for Subaru Impreza STI Body Mount Hole Plug - 909230044
    View related parts

    Subaru Impreza STI GROMMET Sheet D20

    Part Number: 909230044
    $0.32 MSRP: $0.54
    You Save: $0.22 (41%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Grommet-Sheet D20
    • Replaces: 909230011, 909230010
    • Warranty: This genuine part is guaranteed by Subaru's factory warranty.
    Fits the following Vehicles:
    • 2004-2014 Subaru Impreza STI | 2.5 GT, 2.5i, 25i, Outback, Outback Sport, RS, STI, STI Limited, STI Special Edition, STI Sport, TS, WRX, WRX Sport, WRX TR, WRXSS | 2.0L H4 Turbo, 2.5L H4, 2.5L H4 Turbo
  • Diagram for Subaru Impreza STI Body Mount Hole Plug - 909410012
    View related parts

    Subaru Impreza STI Plug

    Part Number: 909410012
    $3.30 MSRP: $4.58
    You Save: $1.28 (28%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Manufacturer Note: D=20
    • Replaces: 60157GA060
    • Warranty: This genuine part is guaranteed by Subaru's factory warranty.
    Fits the following Vehicles:
    • 2008-2014 Subaru Impreza STI | 2.5 GT, 2.5i, Outback Sport, STI, STI Special Edition, STI Sport, WRX, WRX Sport, WRXSS | 2.5L H4, 2.5L H4 Turbo

Subaru Impreza STI Body Mount Hole Plug

The Subaru Impreza STI Body Mount Hole Plug seals the casting ports to maintain the integrity of coolant and oil, ensuring reliable performance on the road and track. By inserting the Body Mount Hole Plug into the factory openings, you create an instantaneous barrier between the water jackets and galleries so every rally bred 2000s Impreza STI and the newer editions are kept clean and cool. Subaru opted for an alloy that closely resembles the aluminum block, allowing the Body Mount Hole Plug to expand and contract through severe heat cycles without shaking loose. The early Impreza STI runs were fitted with a stamped steel Body Mount Hole Plug. Later models were fitted with a corrosion-resistant plug that had tighter machining. But all of them fit with a simple slip fit. When fitted on the car, the Body Mount Hole Plug will prevent dust and dirt from being knocked up during hard driving. This will safeguard the bearings and help to save power. With its unfailing seal, Subaru owners can hammer mountain passes while the coolant circulates and the oil pressure remains rock solid to enjoy that Impreza STI surge. Your collection is covered with a single Body Mount Hole Plug that fits S202, S203, S204, and other special Impreza STI variants to keep them road ready. Having a complete seal allows the engine to reach the target temperature faster, which helps reduce warm up fuel consumption. Additionally, the chance of sudden coolant loss that can cause roadside problems is cut down. The Body Mount Hole Plug is a remarkably small piece of hardware but has a smooth finish, is resistant to rust, and has factory tight tolerances. It proves that even a part the size of a coin can fulfill the lofty goals of Subaru and the Impreza STI badge. Purchase this genuine Subaru Body Mount Hole Plug and drive with confidence knowing your Subaru flat four is sealed tight.

Our website stands as the go-to online destination for OEM Subaru Impreza STI Body Mount Hole Plug. With complete lines of genuine Subaru Impreza STI Body Mount Hole Plug available at unbeatable market prices, we ensure top quality, reliability, and durability. Each part comes backed by the manufacturer's warranty, reinforcing your trust in our offerings.

Related Subaru Impreza STI Parts