My Garage
Cart

Genuine Subaru SVX Valve Stem Seal

Engine Valve Seal
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Valve Stem Seals found

  • Diagram for Subaru SVX Valve Stem Seal - 13207AA050
    View related parts

    Subaru SVX PT040299 Seal Intake Valve

    Part Number: 13207AA050
    $4.52 MSRP: $6.28
    You Save: $1.76 (29%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Seal-Intake Valve
    • Replaced by: 13207AA120
    • Warranty: This genuine part is guaranteed by Subaru's factory warranty.
    Fits the following Vehicles:
    • 1992-1997 Subaru SVX | L&LS, LE, LS, LSi, LSL
  • Diagram for Subaru SVX Valve Stem Seal - 13211AA050
    View related parts

    Subaru SVX PT040299 Seal Exhaust Valve

    Part Number: 13211AA050
    $4.39 MSRP: $6.10
    You Save: $1.71 (29%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Seal-Exhaust Valve
    • Replaced by: 13211AA110
    • Warranty: This genuine part is guaranteed by Subaru's factory warranty.
    Fits the following Vehicles:
    • 1992-1997 Subaru SVX | L&LS, LE, LS, LSi, LSL

Subaru SVX Valve Stem Seal

Subaru SVX Valve Stem Seal prohibits engine oil entry into the combustion chamber. However, it allows the valve stem to slide freely for clean power delivery every mile. Designed specifically for use with the SVX's flat six, this Valve Stem Seal locks tightly around each stem, securing compression, cutting smoke, and achieving the oil consumption targets set by Subaru from the factory, a hallmark of Subaru engineering. The heat resistant rubber blend of this product flexes with every cam cycle, ensuring that the SVX valvetrain can open and close thousands of times a minute without tearing the Valve Stem Seal or loosening its grip. Because every production year shared the same core design, any owner of a 1992 SVX LS, a 1994 LSi, or the very last of the line, the 1996 edition, will enjoy direct fitment of the Valve Stem Seal and a confidence boosting choice for all the models in the wider range. By monitoring the Valve Stem Seal regularly, drivers can identify any wear before the damage becomes too expensive. Replacing the Valve Stem Seal with a genuine part can restore factory specs in minutes. The Valve Stem Seal stands up to constant heat, but it maintains its sealing power in order to support a stronger spark, quicker throttle response, and better catalytic converter life, which means greater efficiency and lower emissions, all of which are Subaru reliability standards. As the transparent stream of exhaust raises visibility to the rear, plugs fire equally under the hood, eliminating misfires when hard acceleration or wet weather strikes. The longevity of these Valve Stem Seals is also impressive as the flexible lip of each seal is resistant to heat cycles that cause lesser seals to crack. Furthermore, Subaru enthusiasts and the SVX fanbase approve of these seals. This small component is lightweight, precise, and proven. It shows how Subaru's attention to detail results in real-world durability, allowing every SVX owner to enjoy grand touring smoothness to high odometer milestones.

Our website stands as the go-to online destination for OEM Subaru SVX Valve Stem Seal. With complete lines of genuine Subaru SVX Valve Stem Seal available at unbeatable market prices, we ensure top quality, reliability, and durability. Each part comes backed by the manufacturer's warranty, reinforcing your trust in our offerings.

Related Subaru SVX Parts

login