Subaru 28496FG001 Boot Kit

Insert the inner race into the cage ensuring markings align.Press balls into the cage.Protect the axleshaft splines with tape, slide on the boot, and then remove the tape.Install the inner race and cage assembly, ensuring the larger diameter side of the cage faces the axleshaft end.Install the snap-ring, fill the boot with CV joint grease, pack the inner race and cage with grease, and then slide the outer race onto the inner race.Install the wire ring retainer, seat the boot ends, equalize boot pressure with a dull screwdriver, and use a special tool to secure the boot clamps.