Subaru 35150SA010 Automatic Transmission Shift Cable

To test the starter, apply the parking brake and try to operate the starter in each shift lever position; it should only work in park or neutral. To replace the shift cable, disconnect it from the battery, ensure the shift lever is in neutral, raise the vehicle, remove the engine splash shield, exhaust parts, heat shield, locking clip, shift cable end, and shift cable from the bracket. To adjust the cable, ensure the shift lever is in neutral, raise the vehicle, and remove the engine splash shield. Exhaust parts, heat shield, loosen the adjusting nuts and turn one until it contacts the linkage arm. Tighten the other, lower the vehicle, test all gear positions, and ensure the engine starts only in park and neutral.