Subaru 20310FG500 STRUT Complete Front RH

Loosen front wheel lug nuts, block rear wheels, and raise the vehicle. Remove front wheels, detach brake hose from strut bracket, and mark upper strut-to-knuckle bolt. Remove ABS sensor from steering knuckle if present, and detach sensor lead. Mark upper camber adjustment bolt, then remove strut-to-knuckle nuts and bolts. In the engine compartment, remove strut-to-strut tower nuts. Support the strut while removing it. Position and install strut assembly, but don't tighten upper nuts. Insert steering knuckle into strut flange, install bolts, align marks, and tighten. Install ABS sensor if present, reattach brake hose bracket, install wheels, and lower vehicle. Tighten lug nuts and strut upper nuts. Check and adjust front end alignment if needed.