How to inspect and replace battery cables on Subaru Forester?

Periodically inspect the entire length of each battery cable for damage, cracked or burned insulation and corrosion. Poor battery cable connections can cause starting problems and decreased engine performance. Check the cable-to-terminal connections at the ends of the cables for cracks, loose wire strands and corrosion. The presence of white, fluffy deposits under the insulation at the cable terminal connection is a sign that the cable is corroded and should be replaced. Check the terminals for distortion, missing mounting bolts and corrosion. When removing the cables always disconnect the negative cable from the negative battery post first and hook it up last or you might accidentally short the battery with the tool that you're using to loosen the cable clamps. Even if only the positive cable is being replaced, be sure to disconnect the negative cable from the negative battery post first. Disconnect the old cables from the negative and positive battery terminals, then disconnect them at their opposite ends as follows. Disconnect the ground cables from the left fender and from the transaxle. Disconnect the positive cable from the alternator and the starter solenoid. Note the routing of each cable to ensure correct installation, then detach any cable retaining clips or clamps and remove the cables. If you are replacing either or both of the battery cables, take them with you when buying new cables. It is vitally important that you replace the cables with identical parts. Cables have characteristics that make them easy to identify. Positive cables are usually red and larger in cross-section; ground cables are usually black and smaller in cross-section. Clean the threads of the starter solenoid or ground connection with a wire brush to remove rust and corrosion. Apply a light coat of battery terminal corrosion inhibitor or petroleum jelly to the threads to prevent future corrosion. Attach the cable to the terminal and tighten the mounting nut/bolt securely. Before connecting a new cable to the battery make sure that it reaches the battery post without having to be stretched. After installing the cables connect the negative cable to the negative battery post.

Genuine Subaru Forester Battery Cable

Car Battery Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

15 Battery Cables found

View related parts
Subaru Forester Battery Cable Assembly
Part Number: 81601SJ000
$185.07 MSRP: $270.57
You Save: $85.50 (32%)
ADD TO CART
Product Specifications
- Other Name: Battery Ca Assy
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2019-2021 Subaru Forester | Base, Limited, Premium, Sport, Touring
View related parts
Subaru Forester Battery Positive Cable Assembly
Part Number: 81601AG070
$203.24 MSRP: $297.13
You Save: $93.89 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Battery; Cable Assembly, Positive Cable
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2009-2013 Subaru Forester | X, X Limited, X Premium, XS, XT, XT Limited | 2.5L H4 DOHC, 2.5L H4 DOHC Turbo, 2.5L H4 SOHC
View related parts
Subaru Forester Battery Positive Cable Assembly
Part Number: 81601SA110
$193.96 MSRP: $283.57
You Save: $89.61 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Battery; Cable Assembly, Positive Cable
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2003-2008 Subaru Forester | Forester Sports, L.L.Bean, X, XS, XT | 2.5L H4, 2.5L H4 Turbo
View related parts
Subaru Forester Battery Cable Assembly
Part Number: 81601SG140
$238.48 MSRP: $348.65
You Save: $110.17 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Battery
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2017-2018 Subaru Forester | 2.5i, 2.5i Limited, 2.5i Premium, 2.5i Touring | 2.5L H4
View related parts
Subaru Forester Battery Cable Assembly
Part Number: 81601SG030
$242.03 MSRP: $353.85
You Save: $111.82 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Battery
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2017-2018 Subaru Forester | 2.5i, 2.5i Limited, 2.5i Premium | 2.5L H4
View related parts
Subaru Forester Battery Positive Negative Cable Harness
Part Number: 81601SG100
$260.50 MSRP: $380.85
You Save: $120.35 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Battery; Cable Assembly, Positive Cable
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2014-2018 Subaru Forester | 2.0XT Premium, 2.0XT Touring, 2.5i, 2.5i Limited, 2.5i Premium, 2.5i Touring | 2.0L H4, 2.5L H4
View related parts
Subaru Forester BATTERY CA ASSY
Part Number: 81601SL020
$230.71 MSRP: $337.30
You Save: $106.59 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2025 Subaru Forester | 4 Cyl 2.5L
View related parts
Subaru Forester BATTERY CA ASSY
Part Number: 81601SL021
$290.47 MSRP: $428.42
You Save: $137.95 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2025 Subaru Forester | 4 Cyl 2.5L
View related parts
Subaru Forester Battery Positive Cable Assembly
Part Number: 81601AG050
$206.80 MSRP: $302.33
You Save: $95.53 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Battery; Cable Assembly, Positive Cable
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2009-2013 Subaru Forester | X, X Premium, XS | 2.5L H4 DOHC, 2.5L H4 SOHC
View related parts
Subaru Forester Battery Positive Negative Wire Harness
Part Number: 81601SG000
$252.18 MSRP: $368.68
You Save: $116.50 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Battery; Cable Assembly, Positive Cable
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2014-2016 Subaru Forester | 2.5i, 2.5i Limited, 2.5i Premium | 2.5L H4
View related parts
Subaru Forester Battery Positive Cable Assembly
Part Number: 81601SA010
$207.45 MSRP: $303.28
You Save: $95.83 (32%)
Product Specifications
- Other Name: Cable Assembly-Battery; Cable Assembly, Positive Cable
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2003-2008 Subaru Forester | Forester Sports, L.L.Bean, X, XS, XT | 2.5L H4, 2.5L H4 Turbo
View related parts
Subaru Forester Battery Cable Assembly
Part Number: 81601FC012
Product Specifications
- Other Name: Cable Assembly-Battery; Cable Assembly, Positive Cable
- Manufacturer Note: MARK"H"
- Replaces: 81601FC010
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1998-2002 Subaru Forester | L, S | 2.5L H4 DOHC, 2.5L H4 DOHC (New EVAPO), 2.5L H4 SOHC
View related parts
Subaru Forester Battery Positive Cable Assembly
Part Number: 81601FC112
Product Specifications
- Other Name: Cable Assembly-Battery; Cable Assembly, Positive Cable
- Manufacturer Note: MARK"S"
- Replaces: 81601FC110
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1998-2002 Subaru Forester | Base, L, S | 2.5L H4 DOHC, 2.5L H4 DOHC (New EVAPO), 2.5L H4 SOHC
View related parts
Subaru Forester Battery Cable Assembly
Part Number: 81601FC110
Product Specifications
- Other Name: Cable Assembly-Battery
- Manufacturer Note: MARK"F"
- Replaced by: 81601FC112
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1998 Subaru Forester | Base, L, S | 2.5L H4 DOHC, 2.5L H4 DOHC (New EVAPO)
View related parts
Subaru Forester Battery Cable Assembly
Part Number: 81601FC010
Product Specifications
- Other Name: Cable Assembly-Battery
- Manufacturer Note: MARK"B"
- Replaced by: 81601FC012
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1998 Subaru Forester | L, S | 2.5L H4 DOHC, 2.5L H4 DOHC (New EVAPO)

Subaru Forester Battery Cable

Forester Battery Cable refers to a cable that interconnects the battery to the vehicle and performs significant functions of transmitting electrical current from the battery to other systems of the vehicle for starting of the engine among other functions. Forester Battery Cable is now an amazing product out of the family mainly due to its durability and unbeaten performance; it means that the vehicle is protected against issues such as oxidation and corrosion that may lead to extremely hard starting of the vehicle. Versatility is an advantage as it fits many models of Subaru ; this appeals to every driver who wants reliability and optimal performance. The Battery Cable should be inspected and maintained to avoid quick failures so as to keep the vehicle efficient and safe. The Subaru Forester is known for its improved intelligence and reliability in mechanics; thus, it is essential to highlight that coming with high-quality Battery Cables make the appliance's electrical connections much more reliable. They distinguished with their wearing capacity and durability that is why Forester Battery Cable can also be described as automotive related product. Forester Battery Cable is one of those essential components for the fifth generation of Subaru Forester, which has been built for five generations and come through as the optimal selling, practical, performing and safe compact SUV. Subaru makes sure that in the aspect of a Battery Cable, they use the optimal quality possible to make sure that vehicles can give safety and satisfaction among the owners.

Our website stands as the go-to online destination for OEM Subaru Forester Battery Cable. With complete lines of genuine Subaru Forester Battery Cable available at unbeatable market prices, we ensure top quality, reliability, and durability. Each part comes backed by the manufacturer's warranty, reinforcing your trust in our offerings.

Subaru Forester Battery Cable Parts Questions & Experts Answers

Battery Positive Cable Assembly
81601SA110
Q: How to inspect and replace battery cables on Subaru Forester?
A:
Periodically inspect the entire length of each battery cable for damage, cracked or burned insulation and corrosion. Poor battery cable connections can cause starting problems and decreased engine performance. Check the cable-to-terminal connections at the ends of the cables for cracks, loose wire strands and corrosion. The presence of white, fluffy deposits under the insulation at the cable terminal connection is a sign that the cable is corroded and should be replaced. Check the terminals for distortion, missing mounting bolts and corrosion. When removing the cables always disconnect the negative cable from the negative battery post first and hook it up last or you might accidentally short the battery with the tool that you're using to loosen the cable clamps. Even if only the positive cable is being replaced, be sure to disconnect the negative cable from the negative battery post first. Disconnect the old cables from the negative and positive battery terminals, then disconnect them at their opposite ends as follows. Disconnect the ground cables from the left fender and from the transaxle. Disconnect the positive cable from the Alternator and the starter solenoid. Note the routing of each cable to ensure correct installation, then detach any cable retaining clips or clamps and remove the cables. If you are replacing either or both of the battery cables, take them with you when buying new cables. It is vitally important that you replace the cables with identical parts. Cables have characteristics that make them easy to identify. Positive cables are usually red and larger in cross-section; ground cables are usually black and smaller in cross-section. Clean the threads of the starter solenoid or ground connection with a wire brush to remove rust and corrosion. Apply a light coat of battery terminal corrosion inhibitor or petroleum jelly to the threads to prevent future corrosion. Attach the cable to the terminal and tighten the mounting nut/bolt securely. Before connecting a new cable to the battery make sure that it reaches the battery post without having to be stretched. After installing the cables connect the negative cable to the negative battery post.