How to Replace the Canister Purge Valve,Fuel Tank Vent Valve and Vapor Canister in Subaru Impreza?

First of all, to replace the purge control solenoid valve, found under the intake manifold or on a bracket, you can disconnect the negative battery terminal and remove hoses and electrical connectors before reinstallation. The EVAP canister is replaced by disconnecting and reconnecting hoses and connectors. Also, the drain filter and valve, part of the canister in newer models, follow a similar replacement process. Replacing the fuel tank pressure sensor and the vent valve involves removing the fuel tank. The pressure control solenoid valve, situated above the rear axle differential or below the EVAP canister, requires disconnection of its connector and hoses. Installation is the reverse of removal.

Genuine Subaru Impreza Vapor Canister

Fuel Vapor Canister

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Vapor Canisters found

View related parts
Subaru Impreza CANISTER Us
Part Number: 42035FJ010
$184.49 MSRP: $269.72
You Save: $85.23 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Canister; Vapor Canister
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2012-2016 Subaru Impreza | Base, Limited, Premium, Sport, Sport Limited
View related parts
Subaru Impreza Canister
Part Number: 42035FG030
$271.79 MSRP: $397.35
You Save: $125.56 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Vapor Canister
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2008-2011 Subaru Impreza | 2.5 GT, 2.5i, Outback Sport, STI, STI Special Edition, STI Sport, WRX, WRX Sport, WRXSS | 2.5L H4, 2.5L H4 Turbo
View related parts
Subaru Impreza Canister
Part Number: 42035SA000
$376.18 MSRP: $554.83
You Save: $178.65 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Vapor Canister
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2005-2007 Subaru Impreza | 25i, Outback, Outback Sport, RS, STI, STI Limited, WRX, WRX TR | 2.0L H4 Turbo, 2.5L H4, 2.5L H4 Turbo
View related parts
Subaru Impreza Canister
Part Number: 42035FL01A
$88.63 MSRP: $128.45
You Save: $39.82 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2017-2021 Subaru Impreza | Base, Limited, Premium, Sport
View related parts
Subaru Impreza CANISTER US
Part Number: 42035FL050
$146.51 MSRP: $214.20
You Save: $67.69 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2024-2025 Subaru Impreza | 4 Cyl 2.0L, 4 Cyl 2.5L
View related parts
Subaru Impreza Canister
Part Number: 42036AA000
Product Specifications
- Other Name: Vapor Canister
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1993-1997 Subaru Impreza | Base, Brighton, L, L+, LE, LS, LX, Outback | 1.8L H4, 2.2L H4
View related parts
Subaru Impreza Canister
Part Number: 42036AC020
Product Specifications
- Other Name: Vapor Canister
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1998-2005 Subaru Impreza | Brighton, L, Outback, RS, STI, TS, WRX | 2.0L H4 Turbo, 2.2L H4 (New EVAPO), 2.2L H4 Series, 2.5L H4, 2.5L H4 SOHC, 2.5L H4 Turbo
View related parts
Subaru Impreza Canister
Part Number: 42036FA030
Product Specifications
- Other Name: Vapor Canister
- Replaces: 42036FA020
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1995-1998 Subaru Impreza | Base, Brighton, L, Outback, RS | 1.8L H4, 2.2L H4 (New EVAPO), 2.5L H4 DOHC
View related parts
Subaru Impreza Canister
Part Number: 42036FA020
Product Specifications
- Replaced by: 42036FA030
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1995 Subaru Impreza | Base, L | 1.8L H4

Subaru Impreza Vapor Canister

The Subaru Impreza Vapor Canister stores fuel vapors that are formed in the fuel tank and then routed into the engine instead of the atmosphere as part of the evaporative emissions control system. The Impreza Vapor Canister is designed with activated charcoal and is part of the Subaru EVAP circuit. When hydrocarbons are absorbed in the microscopic pores, an engine vacuum opens the purge valve. This draws clean air through the canister. Those vapors are carried off into the intake and join the air-fuel mixture. Depending on the vehicle layout, the Vapor Canister may be located in the engine compartment, near the fuel tank, or in a similar area and is connected to those components via hoses. Some Vapor Canister units incorporate a replaceable filter allowing the user to change the element if it gets loaded. On OBD models, the pressure sensor and vent solenoid work with the Vapor Canister so that the engine control module can run leak checks by sealing the system and monitoring vacuum. The Subaru Impreza can meet evaporative emission limits. It does this in a manner that does not compromise the normal driveability of the car.

Our website stands as the go-to online destination for OEM Subaru Impreza Vapor Canister. With complete lines of genuine Subaru Impreza Vapor Canister available at unbeatable market prices, we ensure top quality, reliability, and durability. Each part comes backed by the manufacturer's warranty, reinforcing your trust in our offerings.

Subaru Impreza Vapor Canister Parts Questions & Experts Answers

Canister
42036AC020
Q:
How to Replace the Canister Purge Valve,Fuel Tank Vent Valve and Vapor Canister in Subaru Impreza?
Posted by Dan R.
A:
First of all, to replace the purge control solenoid valve, found under the intake manifold or on a bracket, you can disconnect the negative battery terminal and remove hoses and electrical connectors before reinstallation. The EVAP canister is replaced by disconnecting and reconnecting hoses and connectors. Also, the drain filter and valve, part of the canister in newer models, follow a similar replacement process. Replacing the fuel tank pressure sensor and the vent valve involves removing the fuel tank. The pressure control solenoid valve, situated above the rear axle differential or below the EVAP canister, requires disconnection of its connector and hoses. Installation is the reverse of removal.
Answered by Subaru Parts Specialist Jesse / Mar 29, 2023