How to remove the timing bell and camshaft sprocket(s) and access the camshaft seals on Subaru Outback?

The timing bell and camshaft sprocket(s) should be removed. The inner timing belt covers need to be unbolted and removed so that the camshaft seals can be accessed. To put in a new seal at the same place as the old one, note how deep it is from where the cylinder head ends to its face before getting rid of it. Use a skin pulling device in order to take out any remaining sealants fixed on top of the cam heads. In order to make a substitution for this critical part, use a deep socket along with light tapping while placing it inside the cylinder head housing. Pushing through evenly until you get back at which point the original seal was mounted, is how we are supposed to fix it squarely. The rest of installation is the reversal of removal.

Genuine Subaru Outback Camshaft Seal

Cam Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Camshaft Seals found

View related parts
Subaru Outback Oil Seal 42X55X8
Part Number: 806742160
$5.60 MSRP: $8.12
You Save: $2.52 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Seal; Camshaft Seal
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2004-2012 Subaru Outback | 2.5GT Limited, 2.5GT Premium, Baja-B, GT, GT Limited, XT Limited | 2.5L H4 Turbo
View related parts
Subaru Outback Oil Seal 32X55X8.5
Part Number: 806732160
$5.74 MSRP: $8.32
You Save: $2.58 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Seal; Camshaft Seal
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2004-2009 Subaru Outback | Baja-B, GT, GT Limited, XT Limited | 2.5L H4 Turbo
View related parts
Subaru Outback OILSEAL-32X45X8
Part Number: 806732150
$7.58 MSRP: $10.98
You Save: $3.40 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Seal; Camshaft Seal, Front Seal
- Replaces: 806732050
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1996-2012 Subaru Outback | 2.5i, 2.5i Base, 2.5i Limited, 2.5i Premium, Baja, Baja-S, Base, Brighton, Cold Weather, GT, L, L-S, LS, LS-I, Limited, Out Back, Post, SUS, SUS Limited | 2.2L H4, 2.2L H4 (New EVAPO), 2.2L H4 Series, 2.5L H4, 2.5L H4 SOHC
View related parts
Subaru Outback Oil Seal
Part Number: 806732050
$7.58 MSRP: $10.98
You Save: $3.40 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 806732150
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1996-1999 Subaru Outback | Brighton, GT, L, LS, LS-I, Out Back, Post, SUS | 2.2L H4 , 2.2L H4 (New EVAPO), 2.2L H4 Series, 2.5L H4
View related parts
Subaru Outback O-Ring
Part Number: 806946030
$4.50 MSRP: $6.52
You Save: $2.02 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: O Ring; Rear Seal
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1996-1998 Subaru Outback | Brighton, L, LS, Out Back, Post | 2.2L H4 , 2.2L H4 (New EVAPO)

Subaru Outback Camshaft Seal

Our website stands as the go-to online destination for OEM Subaru Outback Camshaft Seal. With complete lines of genuine Subaru Outback Camshaft Seal available at unbeatable market prices, we ensure top quality, reliability, and durability. Each part comes backed by the manufacturer's warranty, reinforcing your trust in our offerings.

Subaru Outback Camshaft Seal Parts Questions & Experts Answers

Oil Seal 32X55X8.5
806732160
Q: How to remove the timing bell and camshaft sprocket(s) and access the camshaft seals on Subaru Outback?
A:
The timing bell and camshaft sprocket(s) should be removed. The inner timing belt covers need to be unbolted and removed so that the camshaft seals can be accessed. To put in a new seal at the same place as the old one, note how deep it is from where the Cylinder Head ends to its face before getting rid of it. Use a skin pulling device in order to take out any remaining sealants fixed on top of the cam heads. In order to make a substitution for this critical part, use a deep socket along with light tapping while placing it inside the cylinder head housing. Pushing through evenly until you get back at which point the original seal was mounted, is how we are supposed to fix it squarely. The rest of installation is the reversal of removal.