How to Remove the Fuel Pump and Fuel Pump Driver Module on a Subaru Outback?

Disconnect the negative battery terminal and relieve fuel pressure. Remove the rear seat cushion and fuel pump access cover screws. Disconnect the electrical connector and fuel supply line from the fuel pump module. Remove the fuel pump cover and carefully extract the fuel pump module, protecting the fuel level sensor float arm. Remove and inspect the seal ring, replacing if deteriorated. For turbo models, remove the right rear carpet trim or quarter trim panel, disconnect the Fuel Pump Driver Module electrical connector, remove the fastener and Fuel Pump Driver Module. Reverse steps for installation.

Genuine Subaru Outback Fuel Pump Driver Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Fuel Pump Driver Modules found

View related parts
Subaru Outback Control Assembly Fuel Pump
Part Number: 22648AA220
$193.55 MSRP: $282.97
You Save: $89.42 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Contorol Assembly-Fuel Pump
- Replaces: 22648AA200
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2015-2021 Subaru Outback | 2.4R F/R-O, 2.4R Limited, 2.4R Touring, 3.6R, 3.6R Limited, 3.6R Premium, 3.6R Touring | 2.4L H4 DIT, 3.6L H6
View related parts
Subaru Outback Control Assembly Fuel Pump
Part Number: 22648AA081
$120.29 MSRP: $174.33
You Save: $54.04 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Contorol Assembly-Fuel Pump; Control Module, Fuel Pump Controller
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2005-2009 Subaru Outback | GT, GT Limited, XT Limited | 2.5L H4 Turbo
View related parts
Subaru Outback Control Assembly Fuel Pump
Part Number: 22648AA160
$212.93 MSRP: $311.30
You Save: $98.37 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Contorol Assembly-Fuel Pump
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2010-2014 Subaru Outback | 3.6R, 3.6R Limited, 3.6R Premium, 3.6R Touring | 3.6L H6
View related parts
Subaru Outback Control Assembly Fuel Pump
Part Number: 22648AA180
$208.72 MSRP: $305.15
You Save: $96.43 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Contorol Assembly-Fuel Pump
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2010-2012 Subaru Outback | 2.5GT Limited, 2.5GT Premium | 2.5L H4 Turbo
View related parts
Subaru Outback Control Assembly - Fuel Pump
Part Number: 22648AA030
Product Specifications
- Other Name: Contorol Assembly-Fuel Pump
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2003-2004 Subaru Outback | Flat6, Flat6 L.L.Bean, Flat6-S, SUS Flat6 | 3.0L H6
View related parts
Subaru Outback Control Assembly Fuel Pump
Part Number: 22648AA060
Product Specifications
- Other Name: Contorol Assembly-Fuel Pump
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2005-2009 Subaru Outback | 3.0R, 3.0R Limited, 3.0R LL-Bean | 3.0L H6
View related parts
Subaru Outback Control Assembly Fuel Pump
Part Number: 22648AA091
Product Specifications
- Other Name: Contorol Assembly-Fuel Pump
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2004 Subaru Outback | Baja-B | 2.5L H4 Turbo

Subaru Outback Fuel Pump Driver Module

The Fuel Pump Driver Module of a Subaru Outback controls electric flow from the wiring of the vehicle to the fuel pump to provide a constant flow of fuel for the engine. The Fuel Pump Driver Module is an intelligent switch that receives signals from a variety of onboard systems and rhythmically modifies voltage so the pump works only as hard as it has to, reducing heat and maximizing component life. The Fuel Pump Driver Module's solid-state circuitry fine-tunes current to the pump to enhance pressure modulation and pump efficiency. As a result, older resistor-based controls have been eliminated from the design. Documentation indicates that all Subaru Outback models are a single implementation rather than distinct generations, so you won't encounter different specs or wiring layouts through the years. Known as the fuel pump driver or fuel solenoid driver (FSD or FPDM), the Fuel Pump Driver Module provides an all-in-one solution to maintaining flow without getting complicated. With the integration of this Fuel Pump Driver Module, Subaru helps guarantee that every Outback runs as intended mile after mile.

Our website stands as the go-to online destination for OEM Subaru Outback Fuel Pump Driver Module. With complete lines of genuine Subaru Outback Fuel Pump Driver Module available at unbeatable market prices, we ensure top quality, reliability, and durability. Each part comes backed by the manufacturer's warranty, reinforcing your trust in our offerings.

Subaru Outback Fuel Pump Driver Module Parts Questions & Experts Answers

Control Assembly Fuel Pump
22648AA081
Q:
How to Remove the Fuel Pump and Fuel Pump Driver Module on a Subaru Outback?
Posted by Tou X.
A:
Disconnect the negative battery terminal and relieve fuel pressure. Remove the rear seat cushion and fuel pump access cover screws. Disconnect the electrical connector and fuel supply line from the fuel pump module. Remove the fuel pump cover and carefully extract the fuel pump module, protecting the fuel level sensor float arm. Remove and inspect the seal ring, replacing if deteriorated. For turbo models, remove the right rear carpet trim or quarter trim panel, disconnect the Fuel Pump Driver Module electrical connector, remove the fastener and Fuel Pump Driver Module. Reverse steps for installation.
Answered by Subaru Parts Specialist Jesse / Aug 22, 2023