How to Remove the Fuel Pump and Fuel Pump Driver Module on a Subaru Impreza?

Disconnect the negative battery terminal and relieve fuel pressure. Remove the rear seat cushion and fuel pump access cover screws. Disconnect the electrical connector and fuel supply line from the fuel pump module. Remove the fuel pump cover and carefully extract the fuel pump module, protecting the fuel level sensor float arm. Remove and inspect the seal ring, replacing if deteriorated. For turbo models, remove the right rear carpet trim or quarter trim panel, disconnect the Fuel Pump Driver Module electrical connector, remove the fastener and Fuel Pump Driver Module. Reverse steps for installation.

Genuine Subaru Impreza Fuel Pump Driver Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Fuel Pump Driver Modules found

View related parts
Subaru Impreza Control Assembly Fuel Pump
Part Number: 22648AA081
$120.29 MSRP: $174.33
You Save: $54.04 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Contorol Assembly-Fuel Pump; Control Module, Fuel Pump Controller
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2008-2011 Subaru Impreza | 2.5 GT, STI Special Edition, STI Sport, WRX, WRX Sport, WRXSS | 2.5L H4 Turbo
View related parts
Subaru Impreza Control Assembly Fuel Pump
Part Number: 22648AA011
$143.15 MSRP: $209.28
You Save: $66.13 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Contorol Assembly-Fuel Pump
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2002-2005 Subaru Impreza | WRX | 2.0L H4 Turbo
View related parts
Subaru Impreza Control Assembly Fuel Pump
Part Number: 22648AA140
$121.01 MSRP: $175.38
You Save: $54.37 (31%)
ADD TO CART
Product Specifications
- Other Name: Contorol Assembly-Fuel Pump; Control Module
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2008-2011 Subaru Impreza | 2.5 GT, STI, STI Special Edition, WRX, WRX Sport, WRXSS | 2.5L H4 Turbo

Subaru Impreza Fuel Pump Driver Module

The function of the Subaru Impreza Fuel Pump Driver Module is to provide the correct amount of electricity to the pump. This compact device fitted just behind the rear seat acts like a smart switch between the wiring of the car and the pump and varies the voltage so that the pump receives just the right amount of voltage to run. The Fuel Pump Driver Module doesn't control fuel directly but controls electricity. This lessens the load on the main relay and helps the computer adjust pressure in changing speeds. The Fuel Pump Driver Module uses solid state circuitry that pulses power. This pulsing of power happens at a much faster rate than the older mechanical relay. Throughout the years, Subaru maintained a single solid state style, so no functional differences exist, only little packaging changes that do not interfere with the Fuel Pump Driver Module doing its job. Regardless of whether fitted to a first generation or late model Impreza, the basic Fuel Pump Driver Module goal is always the same, and it will assure pump operation for smooth starts, acceleration, and reliability. Subaru Impreza owners can trust in this fuel system approach that underscores durability.

Our website stands as the go-to online destination for OEM Subaru Impreza Fuel Pump Driver Module. With complete lines of genuine Subaru Impreza Fuel Pump Driver Module available at unbeatable market prices, we ensure top quality, reliability, and durability. Each part comes backed by the manufacturer's warranty, reinforcing your trust in our offerings.

Subaru Impreza Fuel Pump Driver Module Parts Questions & Experts Answers

Control Assembly Fuel Pump
22648AA081
Q: How to Remove the Fuel Pump and Fuel Pump Driver Module on a Subaru Impreza?
A:
Disconnect the negative battery terminal and relieve fuel pressure. Remove the rear seat cushion and fuel pump access cover screws. Disconnect the electrical connector and fuel supply line from the fuel pump module. Remove the fuel pump cover and carefully extract the fuel pump module, protecting the fuel level sensor float arm. Remove and inspect the seal ring, replacing if deteriorated. For turbo models, remove the right rear carpet trim or quarter trim panel, disconnect the Fuel Pump Driver Module electrical connector, remove the fastener and Fuel Pump Driver Module. Reverse steps for installation.