How to Replace a Tie Rod End on a Subaru Impreza?

Loosen the front wheel lug nuts and block the rear wheels. Lift the front of the vehicle. Remove the front wheel, mark the position of the tie-rod end, and take out the cotter pin and nut. Disconnect the tie-rod end with a puller and untighten it. Check the tie-rod end boot for damage. Lubricate the new boot and install it. Thread the tie-rod end, then fasten the jam nut and install it on the stud. Install a new cotter pin and then install the wheel. Put down the vehicle and secure the lug nuts. Check the alignment.

Genuine Subaru Impreza Tie Rod End

Steering Rod End

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Tie Rod Ends found

View related parts
Subaru Impreza Tie Rod End Assembly
Part Number: 34161SA001
$43.09 MSRP: $62.45
You Save: $19.36 (31%)
ADD TO CART
Product Specifications
- Other Name: Outer Tie Rod
- Replaces: 34141AA042, 34141AA040, 34161SA000, 34141AA041
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2024-2025 Subaru Impreza | 4 Cyl 2.0L, 4 Cyl 2.5L
- 1993-2016 Subaru Impreza | 2.5 GT, 2.5i, 25i, Base, Brighton, L, L+, LE, Limited, LS, LX, Outback, Outback Sport, Premium, RS, Sport, Sport Limited, STI, STI Limited, STI Special Edition, STI Sport, TS, WRX, WRX Sport, WRX TR, WRXSS | 1.8L H4, 2.0L H4 Turbo, 2.2L H4, 2.2L H4 (New EVAPO), 2.2L H4 Series, 2.5L H4, 2.5L H4 DOHC, 2.5L H4 SOHC, 2.5L H4 Turbo
View related parts
Subaru Impreza Tie Rod End Assembly
Part Number: 34161SA000
$43.09 MSRP: $62.45
You Save: $19.36 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaced by: 34161SA001
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2009-2011 Subaru Impreza | 2.5 GT, 2.5i, Outback Sport, STI, STI Special Edition, STI Sport, WRX, WRX Sport, WRXSS | 2.5L H4, 2.5L H4 Turbo
View related parts
Subaru Impreza Tie Rod End
Part Number: 34141AA042
$43.09 MSRP: $62.45
You Save: $19.36 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Tie Rod End Assembly
- Replaced by: 34161SA001
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2002-2009 Subaru Impreza | 2.5 GT, 2.5i, 25i, Outback, Outback Sport, RS, STI, STI Limited, TS, WRX, WRX Sport, WRX TR, WRXSS | 2.0L H4 Turbo, 2.5L H4, 2.5L H4 Turbo
View related parts
Subaru Impreza Tie Rod End Assembly
Part Number: 34161FL000
$51.32 MSRP: $74.38
You Save: $23.06 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2017-2021 Subaru Impreza | Base, Limited, Premium, Sport
View related parts
Subaru Impreza Tie Rod End
Part Number: 34141AA041
$43.09 MSRP: $62.45
You Save: $19.36 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tie Rod End Assembly
- Replaced by: 34161SA001
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1993-2001 Subaru Impreza | Base, Brighton, L, L+, LE, LS, LX, Outback, RS, TS | 1.8L H4, 2.2L H4, 2.2L H4 (New EVAPO), 2.2L H4 Series, 2.5L H4 DOHC, 2.5L H4 SOHC
View related parts
Subaru Impreza Tie Rod COMPL
Part Number: 34160FL00A
$44.28 MSRP: $64.17
You Save: $19.89 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2020-2021 Subaru Impreza | Base, Limited, Premium, Sport
View related parts
Subaru Impreza Tie Rod End LH
Part Number: 31320GA200
$47.63 MSRP: $69.03
You Save: $21.40 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Tie Rod End Assembly-Gear Box, Inner; Outer Tie Rod
- Manufacturer Note: LH
- Position: Driver Side
- Replaced by: 34161AL010
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1993-1996 Subaru Impreza | Base, L, L+, LE | 1.8L H4
View related parts
Subaru Impreza Tie Rod End RH
Part Number: 31320GA190
$44.67 MSRP: $64.73
You Save: $20.06 (31%)
ADD TO CART
Product Specifications
- Other Name: Tie Rod End Assembly-Gear Box, Outer; Outer Tie Rod
- Manufacturer Note: RH
- Position: Passenger Side
- Replaced by: 34161AL000
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1993-1996 Subaru Impreza | Base, L, L+, LE | 1.8L H4

Subaru Impreza Tie Rod End

The Subaru Impreza Tie Rod End is the connector between the steering rack and the steering knuckle. It controls the angle of the wheels. It also contributes to the stability of the vehicle. Every Tie Rod End has an inner and outer section that transfers force from the steering center link or rack gear to the wheels. This action turns the steering wheel input into swiveling motion during cornering. In the rack and pinion assemblies of many Subaru Impreza vehicles, the Tie Rod End connection to the ends of the rack gear is the only link in that setup. In conventional systems, it works in conjunction with other arms and links, yet performs the same function of steering. A well-secured Tie Rod End maintains alignment, prevents looseness, and allows wheels to return smoothly at varying speeds. The consistent condition of this part ensures that the Subaru steering mechanism does not lose its functionality while driving. This makes the Impreza predictable while driving both on straight roads and while cornering. The functioning of the Tie Rod End of the Subaru Impreza is very important for safety.

Our website stands as the go-to online destination for OEM Subaru Impreza Tie Rod End. With complete lines of genuine Subaru Impreza Tie Rod End available at unbeatable market prices, we ensure top quality, reliability, and durability. Each part comes backed by the manufacturer's warranty, reinforcing your trust in our offerings.

Subaru Impreza Tie Rod End Parts Questions & Experts Answers

Tie Rod End
34141AA042
Q:
How to Replace a Tie Rod End on a Subaru Impreza?
Posted by Shane F.
A:
Loosen the front wheel lug nuts and block the rear wheels. Lift the front of the vehicle. Remove the front wheel, mark the position of the tie-rod end, and take out the cotter pin and nut. Disconnect the tie-rod end with a puller and untighten it. Check the tie-rod end boot for damage. Lubricate the new boot and install it. Thread the tie-rod end, then fasten the jam nut and install it on the stud. Install a new cotter pin and then install the wheel. Put down the vehicle and secure the lug nuts. Check the alignment.
Answered by Subaru Parts Specialist Edgar / Feb 15, 2024