How to the removal of the camshaft and related components on Subaru Legacy?

To take off the timing belt, crankshaft, and camshaft sprockets start by taking off the inner timing belt covers together with the valve covers, and the camshaft position sensor. In the case of the non-turbocharged models between 2000 to 2005, the process of removing the rocker arm assembly entails the gradual loosening of the bolts in backward order of the sequence followed while tightening the same; the exploded components must also be stored systematically. Then, loosen and cut off the timing belt tensioner and bracket, then unbolt oil dipstick tube,alumni take off camshaft end cap assembly carefully but avoiding journal bores. For the models manufactured from 2006 onwards, provide a special spring installer tool to eliminate the spring stopper and add the lock into the intake rocker arm assembly while lifting it, and accomplish similar actions with other components. For the turbocharged models, the valve clearances have to be checked and for this the VVT oil flow control solenoid connectors have to be disconnected and for models equipped with the timing belt tensioner and oil dipstick tube has to be removed. Then, slowly take off the intake and exhaust camshaft cap assemblies, keeping all the items in order. Lifters can be removed from the cylinder heads during inspection with wear areas verified and the diameter of new and used measure in order to decide on replacements. Inspect rocker arms and camshaft parts for wearing and measuring camshaft journal diameter and lobe height; using Plastigage to determine oil clearance. Lubricate the cam shaft journals and lobes and prepare the camshaft end cap assembly with anaerobic sealant and then install the camshafts very cautiously. Correct valve overlaps with gases if necessary, as well as, applying oil and re-insertion of valve lifters and putting into considerations the right postures of the camshaft to avoid instances of valve damage. Oil number one camshaft cap sealing surface, apply sealant, oil bearing surfaces, then fasten the cap. Last, the camshaft sprockets, the timing belt and the valvetrain are put back, together with the valve covers, and new gaskets should be used, After the engine has been started, it should be examined for any unusual sounds and oil leaks.

Genuine Subaru Legacy Camshaft

Cam

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

90 Camshafts found

View related parts
Subaru Legacy CAMSHAFT Complete Intake LH
Part Number: 13037AA352
$189.70 MSRP: $277.33
You Save: $87.63 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft Complete-Intake,Left; Camshaft, Camshaft Gear
- Position: Driver Side
- Replaces: 13037AA351, 13037AA350
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2004-2009 Subaru Legacy | Baja-B, GT, GT Limited, XT Limited | 2.5L H4 Turbo
View related parts
Subaru Legacy CAMSHAFT Complete Exhaust LH
Part Number: 13052AA352
$189.70 MSRP: $277.33
You Save: $87.63 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft Complete-Exhaust,Left; Camshaft, Camshaft Gear
- Position: Driver Side
- Replaces: 13052AA351, 13052AA350
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2004-2009 Subaru Legacy | Baja-B, GT, GT Limited, XT Limited | 2.5L H4 Turbo
View related parts
Subaru Legacy CAMSHAFT Complete Exhaust RH
Part Number: 13034AA352
$189.70 MSRP: $277.33
You Save: $87.63 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft Complete-Exhaust,Right; Camshaft, Camshaft Gear
- Position: Passenger Side
- Replaces: 13034AA350, 13034AA351
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2004-2009 Subaru Legacy | Baja-B, GT, GT Limited, XT Limited | 2.5L H4 Turbo
View related parts
Subaru Legacy CAMSHAFT Complete RH
Part Number: 13020AA720
$196.81 MSRP: $287.73
You Save: $90.92 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft Complete-Right; Camshaft
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2008-2012 Subaru Legacy | 2.5i, 2.5i Base, 2.5i Limited, 2.5i Premium, Base | 2.5L H4, 2.5L H4 SOHC
View related parts
Subaru Legacy CAMSHAFT Complete-Exhaust LH
Part Number: 13052AB220
$251.02 MSRP: $366.98
You Save: $115.96 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: CAMSHAFT Cp-EXH Lh
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2020-2021 Subaru Legacy | 2.4R F/R-O, 2.4R Limited, 2.4R Touring | 2.4L H4 DIT
View related parts
Subaru Legacy CAMSHAFT Complete-Int LH
Part Number: 13037AB220
$251.02 MSRP: $366.98
You Save: $115.96 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: CAMSHAFT Cp-Int Lh
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2020-2021 Subaru Legacy | 2.4R F/R-O, 2.4R Limited, 2.4R Touring | 2.4L H4 DIT
View related parts
Subaru Legacy CAMSHAFT Complete Exhaust
Part Number: 13052AB031
$250.91 MSRP: $366.83
You Save: $115.92 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft Complete-Exhaust,Left; Exhaust Camshaft
- Position: Driver Side
- Replaces: 13052AB030
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2015-2019 Subaru Legacy | 2.5i, 2.5i Limited, 2.5i Premium, 2.5i Sport, 2.5i Touring | 2.5L H4
View related parts
Subaru Legacy CAMSHAFT Complete Exhaust
Part Number: 13034AB031
$250.91 MSRP: $366.83
You Save: $115.92 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft Complete-Exhaust,Right; Exhaust Camshaft
- Position: Passenger Side
- Replaces: 13034AB030
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2015-2019 Subaru Legacy | 2.5i, 2.5i Limited, 2.5i Premium, 2.5i Sport, 2.5i Touring | 2.5L H4
View related parts
Subaru Legacy CAMSHAFT Cp-EXH LH
Part Number: 13052AB251
$251.02 MSRP: $366.98
You Save: $115.96 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Position: Driver Side
- Replaces: 13052AB250
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2020-2025 Subaru Legacy | 2.5i, 2.5i Limited, 2.5i Premium, 2.5i Sport, 2.5i Touring | 2.5L H4 DI, 4 Cyl 2.5L
View related parts
Subaru Legacy CAMSHAFT Complete Intake
Part Number: 13037AB031
$250.91 MSRP: $366.83
You Save: $115.92 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft Complete-Intake,Left; Intake Camshaft
- Position: Driver Side
- Replaces: 13037AB030
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2015-2019 Subaru Legacy | 2.5i, 2.5i Limited, 2.5i Premium, 2.5i Sport, 2.5i Touring | 2.5L H4
View related parts
Subaru Legacy CAMSHAFT Cp-EXH RH
Part Number: 13034AB251
$251.02 MSRP: $366.98
You Save: $115.96 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Position: Passenger Side
- Replaces: 13034AB250
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2020-2025 Subaru Legacy | 2.5i, 2.5i Limited, 2.5i Premium, 2.5i Sport, 2.5i Touring | 2.5L H4 DI, 4 Cyl 2.5L
View related parts
Subaru Legacy CAMSHAFT Complete-Int RH
Part Number: 13031AB220
$251.02 MSRP: $366.98
You Save: $115.96 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: CAMSHAFT Cp-Int Rh
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2020-2021 Subaru Legacy | 2.4R F/R-O, 2.4R Limited, 2.4R Touring | 2.4L H4 DIT
View related parts
Subaru Legacy CAMSHAFT Complete RH
Part Number: 13020AA710
$227.32 MSRP: $332.33
You Save: $105.01 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft Complete-Right; Camshaft
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2006-2007 Subaru Legacy | 2.5i, 2.5i Limited | 2.5L H4
View related parts
Subaru Legacy CAMSHAFT Complete Intake RH
Part Number: 13031AA670
$299.72 MSRP: $442.07
You Save: $142.35 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft Complete-Intake,Right; Camshaft
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2010-2019 Subaru Legacy | 3.6R, 3.6R Limited, 3.6R Premium, 3.6R Touring | 3.6L H6
View related parts
Subaru Legacy CAMSHAFT Complete Intake
Part Number: 13031AB031
$250.91 MSRP: $366.83
You Save: $115.92 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft Complete-Intake,Right; Intake Camshaft
- Position: Passenger Side
- Replaces: 13031AB030
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2015-2019 Subaru Legacy | 2.5i, 2.5i Limited, 2.5i Premium, 2.5i Sport, 2.5i Touring | 2.5L H4
View related parts
Subaru Legacy CAMSHAFT Cp-Int LH
Part Number: 13037AB251
$251.02 MSRP: $366.98
You Save: $115.96 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Position: Driver Side
- Replaces: 13037AB250
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2020-2025 Subaru Legacy | 2.5i, 2.5i Limited, 2.5i Premium, 2.5i Sport, 2.5i Touring | 2.5L H4 DI, 4 Cyl 2.5L
View related parts
Subaru Legacy CAMSHAFT Cp-Int RH
Part Number: 13031AB251
$251.02 MSRP: $366.98
You Save: $115.96 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Position: Passenger Side
- Replaces: 13031AB250
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2020-2025 Subaru Legacy | 2.5i, 2.5i Limited, 2.5i Premium, 2.5i Sport, 2.5i Touring | 2.5L H4 DI, 4 Cyl 2.5L
View related parts
Subaru Legacy CAMSHAFT Complete Exhaust LH
Part Number: 13052AA670
$299.72 MSRP: $442.07
You Save: $142.35 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft Complete-Exhaust,Left; Camshaft
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2010-2019 Subaru Legacy | 3.6R, 3.6R Limited, 3.6R Premium, 3.6R Touring | 3.6L H6
View related parts
Subaru Legacy CAMSHAFT Complete-Exhaust RH
Part Number: 13034AB220
$251.02 MSRP: $366.98
You Save: $115.96 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: CAMSHAFT Cp-EXH Rh
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2020-2021 Subaru Legacy | 2.4R F/R-O, 2.4R Limited, 2.4R Touring | 2.4L H4 DIT
View related parts
Subaru Legacy CAMSHAFT Complete LH
Part Number: 13022AA680
$227.32 MSRP: $332.33
You Save: $105.01 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft Complete-Left; Camshaft
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2006-2007 Subaru Legacy | 2.5i, 2.5i Limited | 2.5L H4

| Page 1 of 5 |Next >

1-20 of 90 Results

Subaru Legacy Camshaft

Our website stands as the go-to online destination for OEM Subaru Legacy Camshaft. With complete lines of genuine Subaru Legacy Camshaft available at unbeatable market prices, we ensure top quality, reliability, and durability. Each part comes backed by the manufacturer's warranty, reinforcing your trust in our offerings.

Subaru Legacy Camshaft Parts Questions & Experts Answers

CAMSHAFT Complete RH
13020AA720
Q: How to the removal of the camshaft and related components on Subaru Legacy?
A:
To take off the Timing Belt, crankshaft, and camshaft sprockets start by taking off the inner timing belt covers together with the valve covers, and the camshaft position sensor. In the case of the non-turbocharged models between 2000 to 2005, the process of removing the rocker arm assembly entails the gradual loosening of the bolts in backward order of the sequence followed while tightening the same; the exploded components must also be stored systematically. Then, loosen and cut off the timing belt tensioner and bracket, then unbolt oil dipstick tube,alumni take off camshaft end cap assembly carefully but avoiding journal bores. For the models manufactured from 2006 onwards, provide a special spring installer tool to eliminate the spring stopper and add the lock into the intake rocker arm assembly while lifting it, and accomplish similar actions with other components. For the turbocharged models, the valve clearances have to be checked and for this the VVT oil flow control solenoid connectors have to be disconnected and for models equipped with the timing belt tensioner and oil dipstick tube has to be removed. Then, slowly take off the intake and exhaust camshaft cap assemblies, keeping all the items in order. Lifters can be removed from the cylinder heads during inspection with wear areas verified and the diameter of new and used measure in order to decide on replacements. Inspect rocker arms and camshaft parts for wearing and measuring camshaft journal diameter and lobe height; using Plastigage to determine oil clearance. Lubricate the cam shaft journals and lobes and prepare the camshaft end cap assembly with anaerobic sealant and then install the camshafts very cautiously. Correct valve overlaps with gases if necessary, as well as, applying oil and re-insertion of valve lifters and putting into considerations the right postures of the camshaft to avoid instances of valve damage. Oil number one camshaft cap sealing surface, apply sealant, oil bearing surfaces, then fasten the cap. Last, the camshaft sprockets, the timing belt and the valvetrain are put back, together with the valve covers, and new gaskets should be used, After the engine has been started, it should be examined for any unusual sounds and oil leaks.