How to remove and install the Trunk Lid Latch and Trunk Lock Cylinder for a Subaru Legacy?

To remove the latch in 2004 and earlier models, one has to first open the trunk then remove other trim panels around the latch after which he draws a line around the latch assembly to help in re-installation of the components. Unlock the lock cylinder by rotating a rod that is fasten to it then, remove the two nuts or bolts holding the latch and pull it out. Regarding installation, you should place the latch in the position of the line you made earlier. To do for vehicles produced starting from 2005, turn the vehicle on and open the trunk, pull the trim panels, unscrew the arresting mechanism two clips, disconnect the plastic connector and the cable from component, back of the latch, and then posted the latch back into position while reconnecting the clips. For 2004 and earlier models, to replace the trunk lock cylinder, one would have to first open the trunk, remove all the necessary trim panels, disconnect the latch to lock cylinder rod, followed by the removal of the lock cylinder retaining clip using a pair of pliers and finally pulling the lock cylinder out of the trunk lid from the exterior. For models 2005 and later: Open the trunk, then pull out the trim panels, and take out the trunk lid release handle; then to disconnect the connectors of the trunk opener cable, and to erase two fasteners to take out the lock assembly. Removal and installation for both models are quite the opposite of one another.

Genuine Subaru Legacy Trunk Lid Latch

Luggage Compartment Door Lock Assembly

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Trunk Lid Latches found

View related parts
Subaru Legacy Lock Assembly Trunk
Part Number: 57530AJ00A
$46.18 MSRP: $66.93
You Save: $20.75 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly-Trunk Lid; Lock
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2010-2014 Subaru Legacy | 2.5GT Limited, 2.5GT Premium, 2.5i, 2.5i Limited, 2.5i Premium, 2.5i Sport, 3.6R, 3.6R Limited, 3.6R Premium | 2.5L H4 DOHC, 2.5L H4 SOHC, 2.5L H4 Turbo, 3.6L H6
View related parts
Subaru Legacy Lock Assembly Trunk Lid
Part Number: 57530AG010
$92.77 MSRP: $134.45
You Save: $41.68 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly-Trunk Lid; Lock
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2005-2009 Subaru Legacy | 2.5i, 2.5i Base, 2.5i Limited, 3.0R, 3.0R Limited, 3.0R LL-Bean, GT, GT Limited | 2.5L H4, 2.5L H4 Turbo, 3.0L H6
View related parts
Subaru Legacy Lock Trunk
Part Number: 57530AG060
$92.38 MSRP: $133.88
You Save: $41.50 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly-Trunk Lid; Lock
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2009 Subaru Legacy | 2.5i, 2.5i Base, 2.5i Limited, 3.0R, 3.0R Limited, GT, GT Limited | 2.5L H4, 2.5L H4 Turbo, 3.0L H6
View related parts
Subaru Legacy Lock Assembly Trunk
Part Number: 57530AL00A
$59.78 MSRP: $86.63
You Save: $26.85 (31%)
Product Specifications
- Other Name: Lock Assembly-Trunk Lid; Lock
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2015-2021 Subaru Legacy | 2.4R Limited, 2.4R Touring, 2.5i, 2.5i Limited, 2.5i Premium, 2.5i Sport, 2.5i Touring, 3.6R, 3.6R Limited, 3.6R Premium | 2.4L H4 DIT, 2.5L H4, 2.5L H4 DI, 3.6L H6
View related parts
Subaru Legacy Lock Assembly Trunk
Part Number: 57530AA010
Product Specifications
- Other Name: Lock Assembly-Trunk Lid; Lock
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1990-1991 Subaru Legacy | Base, L, LS, LS-D, Turbo
View related parts
Subaru Legacy Lock Assembly (Trunk)
Part Number: 57530AE00B
Product Specifications
- Other Name: Lock Assembly-Trunk Lid; Lock
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2001-2002 Subaru Legacy | GT, L, SUS Flat6, SUS Limited | 2.5L H4, 3.0L H6
View related parts
Subaru Legacy Lock Assembly (Trunk)
Part Number: 57530AE00C
Product Specifications
- Other Name: Lock Assembly-Trunk Lid; Lock
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2002-2004 Subaru Legacy | GT, L, L-S, SUS Flat6, SUS Limited | 2.5L H4, 3.0L H6
View related parts
Subaru Legacy Lock Assembly Trunk
Part Number: 57530AE00A
Product Specifications
- Other Name: Lock Assembly-Trunk Lid; Lock
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2000-2001 Subaru Legacy | GT, L, SUS Limited | 2.5L H4
View related parts
Subaru Legacy Lock Assembly Trunk
Part Number: 57530AA030
Product Specifications
- Other Name: Lock Assembly-Trunk Lid; Lock
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1992-1994 Subaru Legacy | L, LS, Turbo
View related parts
Subaru Legacy Lock Assembly Trunk
Part Number: 57530AC000
Product Specifications
- Other Name: Lock Assembly-Trunk Lid; Lock
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1995-1999 Subaru Legacy | GT, L, LS, LS-I, SUS | 2.2L H4 , 2.2L H4 (New EVAPO), 2.2L H4 Series, 2.5L H4
View related parts
Subaru Legacy Lock Assembly Trunk
Part Number: 57530AC020
Product Specifications
- Other Name: Lock Assembly-Trunk Lid; Lock
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1995 Subaru Legacy | Base | 2.2L H4
View related parts
Subaru Legacy Lock Assembly Trunk
Part Number: 57530AC010
Product Specifications
- Other Name: Lock Assembly-Trunk Lid; Lock
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1995-1998 Subaru Legacy | GT, LS, LS-I | 2.2L H4 , 2.2L H4 (New EVAPO), 2.5L H4

Subaru Legacy Trunk Lid Latch

Our website stands as the go-to online destination for OEM Subaru Legacy Trunk Lid Latch. With complete lines of genuine Subaru Legacy Trunk Lid Latch available at unbeatable market prices, we ensure top quality, reliability, and durability. Each part comes backed by the manufacturer's warranty, reinforcing your trust in our offerings.

Subaru Legacy Trunk Lid Latch Parts Questions & Experts Answers

Lock Assembly Trunk Lid
57530AG010
Q: How to remove and install the Trunk Lid Latch and Trunk Lock Cylinder for a Subaru Legacy?
A:
To remove the latch in 2004 and earlier models, one has to first open the trunk then remove other trim panels around the latch after which he draws a line around the latch assembly to help in re-installation of the components. Unlock the lock cylinder by rotating a rod that is fasten to it then, remove the two nuts or bolts holding the latch and pull it out. Regarding installation, you should place the latch in the position of the line you made earlier. To do for vehicles produced starting from 2005, turn the vehicle on and open the trunk, pull the trim panels, unscrew the arresting mechanism two clips, disconnect the plastic connector and the cable from component, back of the latch, and then posted the latch back into position while reconnecting the clips. For 2004 and earlier models, to replace the trunk lock cylinder, one would have to first open the trunk, remove all the necessary trim panels, disconnect the latch to lock cylinder rod, followed by the removal of the lock cylinder retaining clip using a pair of pliers and finally pulling the lock cylinder out of the trunk lid from the exterior. For models 2005 and later: Open the trunk, then pull out the trim panels, and take out the trunk lid release handle; then to disconnect the connectors of the trunk opener cable, and to erase two fasteners to take out the lock assembly. Removal and installation for both models are quite the opposite of one another.