How to remove and install the Trunk Lid Latch and Trunk Lock Cylinder for a Subaru Legacy?

To remove the latch in 2004 and earlier models, one has to first open the trunk then remove other trim panels around the latch after which he draws a line around the latch assembly to help in re-installation of the components. Unlock the lock cylinder by rotating a rod that is fasten to it then, remove the two nuts or bolts holding the latch and pull it out. Regarding installation, you should place the latch in the position of the line you made earlier. To do for vehicles produced starting from 2005, turn the vehicle on and open the trunk, pull the trim panels, unscrew the arresting mechanism two clips, disconnect the plastic connector and the cable from component, back of the latch, and then posted the latch back into position while reconnecting the clips. For 2004 and earlier models, to replace the trunk lock cylinder, one would have to first open the trunk, remove all the necessary trim panels, disconnect the latch to lock cylinder rod, followed by the removal of the lock cylinder retaining clip using a pair of pliers and finally pulling the lock cylinder out of the trunk lid from the exterior. For models 2005 and later: Open the trunk, then pull out the trim panels, and take out the trunk lid release handle; then to disconnect the connectors of the trunk opener cable, and to erase two fasteners to take out the lock assembly. Removal and installation for both models are quite the opposite of one another.

Genuine Subaru Legacy Trunk Lock Cylinder

Back Door Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Trunk Lock Cylinders found

View related parts
Subaru Legacy Lock Cylinder Trunk Lid
Part Number: 57420AC040
$28.96 MSRP: $41.97
You Save: $13.01 (31%)
ADD TO CART
Product Specifications
- Other Name: Key Lock Assy Trunk ; Key Lock Set-Trank; Cylinder & Keys, Lock Cylinder
- Replaces: 57441AA060
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1995-1999 Subaru Legacy | Base, GT, L, LS, LS-I, SUS | 2.2L H4, 2.2L H4 (New EVAPO), 2.2L H4 Series, 2.5L H4
- 1990-1991 Subaru Legacy | Base, L, LS, LS-D, Turbo
View related parts
Subaru Legacy Lock Cylinder Trunk Lid
Part Number: 57449AE02A
$22.39 MSRP: $32.45
You Save: $10.06 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Key Lock Assy Trunk ; Key Lock Set-Trank; Cylinder & Keys, Lock Cylinder
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2000-2004 Subaru Legacy | GT, L, L-S, SUS Flat6, SUS Limited | 2.5L H4, 3.0L H6
View related parts
Subaru Legacy Lock Cylinder Trunk Lid
Part Number: 57449AL00A
$41.96 MSRP: $60.82
You Save: $18.86 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Key Lock Trunk Repair ; Key Lock Set-Trank; Cylinder & Keys, Lock Cylinder
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2015-2019 Subaru Legacy | 2.5i, 2.5i Limited, 2.5i Premium, 2.5i Sport, 3.6R, 3.6R Limited, 3.6R Premium | 2.5L H4, 3.6L H6
View related parts
Subaru Legacy Lock Cylinder Trunk Lid
Part Number: 57449AL01A
$73.34 MSRP: $106.28
You Save: $32.94 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Key Lock Trunk Repair ; Key Lock Set-Trank; Cylinder & Keys, Lock Cylinder
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2015-2019 Subaru Legacy | 2.5i Limited, 2.5i Premium, 2.5i Sport, 3.6R Limited | 2.5L H4, 3.6L H6
View related parts
Subaru Legacy Lock Cylinder Trunk Lid
Part Number: 57449AJ00A
$60.74 MSRP: $88.03
You Save: $27.29 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Keylock - Trunk ; Key Lock Set-Trank; Cylinder & Keys, Lock Cylinder
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2010-2014 Subaru Legacy | 2.5GT Limited, 2.5GT Premium, 2.5i, 2.5i Limited, 2.5i Premium, 2.5i Sport, 3.6R, 3.6R Limited, 3.6R Premium | 2.5L H4 DOHC, 2.5L H4 SOHC, 2.5L H4 Turbo, 3.6L H6
View related parts
Subaru Legacy Lock Cylinder Trunk Lid
Part Number: 57441AA060
$28.96 MSRP: $41.97
You Save: $13.01 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Key Lock Assy Trunk ; Key Lock Set-Trank
- Replaced by: 57420AC040
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1990-1991 Subaru Legacy | Base, L, LS, LS-D, Turbo
View related parts
Subaru Legacy Lock Cylinder Trunk Lid
Part Number: 57420AC080
$84.36 MSRP: $122.27
You Save: $37.91 (32%)
Product Specifications
- Other Name: Key Lock Assy Trunk ; Key Lock Set-Trank; Cylinder & Keys, Lock Cylinder
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1995-1998 Subaru Legacy | GT, LS, LS-I | 2.2L H4 , 2.2L H4 (New EVAPO), 2.5L H4
View related parts
Subaru Legacy Lock Cylinder Trunk Lid
Part Number: 57449AJ000
$70.47 MSRP: $102.13
You Save: $31.66 (31%)
Product Specifications
- Other Name: Key Lock Trunk ; Key Lock Set-Trank
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2010-2013 Subaru Legacy | 2.5i Limited, 3.6R Limited | 2.5L H4 DOHC, 2.5L H4 SOHC, 3.6L H6
View related parts
Subaru Legacy Lock Cylinder Trunk Lid
Part Number: 57441AA130
Product Specifications
- Other Name: Key Lock Assy Trunk ; Key Lock Set-Trank
- Replaced by: 57441AA140
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1992-1994 Subaru Legacy | L, LS, Turbo
View related parts
Subaru Legacy Lock Cylinder Trunk Lid
Part Number: 57449AG00A
Product Specifications
- Other Name: Key Lock-Trunk ; Key Lock Set-Trank; Cylinder & Keys, Lock Cylinder
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2005-2009 Subaru Legacy | 2.5i, 2.5i Base, 2.5i Limited, 3.0R, 3.0R Limited, 3.0R LL-Bean, GT, GT Limited | 2.5L H4, 2.5L H4 Turbo, 3.0L H6

Subaru Legacy Trunk Lock Cylinder

Subaru Legacy Trunk Lock Cylinder keeps the spacious rear hold secure so expensive gear stays where you left it. Drivers use this small keyed device to clamp the lid shut, and with the Trunk Lock Cylinder engaged a thief cannot pull the latch because the internal pins stay locked. The roomy compartment can swallow tools, a spare tire, fishing tackle and building materials, yet all that capacity matters only if the gate remains sealed, so the Trunk Lock Cylinder turns that simple key twist into real peace of mind. Earlier and current Legacy versions follow the same straightforward design, though some place the Trunk Lock Cylinder in plain view near the plate while others hide it under a trim lip, a cosmetic shift rather than a functional one. Skipping the quick twist leaves valuables exposed, a risk no Subaru owner wants to take. Remembering the Trunk Lock Cylinder after loading groceries or gear has become second nature for many Subaru drivers, making every Legacy trip feel a little safer.

Our website stands as the go-to online destination for OEM Subaru Legacy Trunk Lock Cylinder. With complete lines of genuine Subaru Legacy Trunk Lock Cylinder available at unbeatable market prices, we ensure top quality, reliability, and durability. Each part comes backed by the manufacturer's warranty, reinforcing your trust in our offerings.

Subaru Legacy Trunk Lock Cylinder Parts Questions & Experts Answers

Lock Cylinder Trunk Lid
57449AE02A
Q: How to remove and install the Trunk Lid Latch and Trunk Lock Cylinder for a Subaru Legacy?
A:
To remove the latch in 2004 and earlier models, one has to first open the trunk then remove other trim panels around the latch after which he draws a line around the latch assembly to help in re-installation of the components. Unlock the lock cylinder by rotating a rod that is fasten to it then, remove the two nuts or bolts holding the latch and pull it out. Regarding installation, you should place the latch in the position of the line you made earlier. To do for vehicles produced starting from 2005, turn the vehicle on and open the trunk, pull the trim panels, unscrew the arresting mechanism two clips, disconnect the plastic connector and the cable from component, back of the latch, and then posted the latch back into position while reconnecting the clips. For 2004 and earlier models, to replace the trunk lock cylinder, one would have to first open the trunk, remove all the necessary trim panels, disconnect the latch to lock cylinder rod, followed by the removal of the lock cylinder retaining clip using a pair of pliers and finally pulling the lock cylinder out of the trunk lid from the exterior. For models 2005 and later: Open the trunk, then pull out the trim panels, and take out the trunk lid release handle; then to disconnect the connectors of the trunk opener cable, and to erase two fasteners to take out the lock assembly. Removal and installation for both models are quite the opposite of one another.