What is the responsibility of the Evaporative Emissions Control (EVAP) system,Canister Purge Valve,Fuel Tank Vent Valve and Vapor Canister and how to replace on Subaru Legacy?

A uniform Evaporative Emissions Control (EVAP) system running through Baja, Legacy and Outback models redirects fuel vapors to the intake manifold in operation. The system consists of fuel tank filler neck cap along with other elements such as the fuel cut valve and EVAP canister and drain filter and drain valve and fuel tank pressure sensor and pressure control solenoid valve and shut-off valve and vent valve and purge control solenoid valve which are primarily installed beneath the vehicle. The system controls fuel tank pressure through vapor storage until it ventilates into the intake manifold. The canister provides atmospheric air entry to avoid vacuum development during purging. During operation the diagnostic system monitors system leaks and the valves safeguard the system throughout fueling operations. When an EVAP line develops a kink the fuel tank filler neck cap includes a relief valve so vacuum formation stays prevented. The purge control solenoid valve needs replacement by accessing it under the intake manifold while the EVAP canister requires replacement at the rear of the vehicle. The drain valve together with the drain filter sits above the canister while the fuel tank pressure sensor exists above the inner CV joint boot. The pressure control solenoid valve installation occurs above the rear axle differential while the vent valve placement takes position on top of the fuel tank. To reach the shut valve mechanics need to detach the fuel filler neck pipe because this component is positioned at the top of the assembly.

Genuine Subaru Legacy Vapor Canister

Fuel Vapor Canister

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Vapor Canisters found

View related parts
Subaru Legacy CANISTER
Part Number: 42035AG03A
$251.56 MSRP: $367.78
You Save: $116.22 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Vapor Canister
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2005-2009 Subaru Legacy | 2.5i, 2.5i Base, 2.5i Limited, 3.0R, 3.0R Limited, 3.0R LL-Bean, Base, GT, GT Limited, XT Limited | 2.5L H4, 2.5L H4 Turbo, 3.0L H6
View related parts
Subaru Legacy CANISTER
Part Number: 42035AE03A
$192.51 MSRP: $281.45
You Save: $88.94 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Vapor Canister
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2004 Subaru Legacy | Baja, Baja-S, Base, Cold Weather, Flat6, Flat6 L.L.Bean, Flat6-S, GT, L, Limited, L-S, SUS Flat6, SUS Limited | 2.5L H4, 3.0L H6
View related parts
Subaru Legacy CANISTER
Part Number: 42035AL04A
$101.00 MSRP: $146.38
You Save: $45.38 (31%)
ADD TO CART
Product Specifications
- Other Name: Vapor Canister
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2015-2019 Subaru Legacy | 2.5i, 2.5i Limited, 2.5i Premium, 2.5i Sport, 2.5i Touring, 3.6R, 3.6R Limited, 3.6R Premium, 3.6R Touring | 2.5L H4, 3.6L H6
View related parts
Subaru Legacy CANISTER
Part Number: 42035AJ04A
$190.00 MSRP: $277.78
You Save: $87.78 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Vapor Canister
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2010-2012 Subaru Legacy | 2.5i, 2.5i Limited, 2.5i Premium, 3.6R, 3.6R Limited, 3.6R Premium | 2.5L H4 SOHC, 3.6L H6
View related parts
Subaru Legacy CANISTER Complete Na
Part Number: 42035AJ08A
$504.69 MSRP: $737.85
You Save: $233.16 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Canister; Vapor Canister
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2013-2014 Subaru Legacy | 2.5i, 2.5i Limited, 2.5i Premium, 2.5i Sport, 2.5i Touring, 3.6R, 3.6R Limited, 3.6R Premium, 3.6R Touring | 2.5L H4 DOHC, 3.6L H6
View related parts
Subaru Legacy CANISTER
Part Number: 42035AL05A
$132.77 MSRP: $192.42
You Save: $59.65 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Vapor Canister
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2015-2019 Subaru Legacy | 2.5i, 2.5i Limited, 2.5i Premium, 2.5i Sport, 2.5i Touring | 2.5L H4
View related parts
Subaru Legacy CANISTER Us
Part Number: 42035AN00A
$213.43 MSRP: $312.03
You Save: $98.60 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 42035AN00C
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2020-2021 Subaru Legacy | 2.4R F/R-O, 2.4R Limited, 2.4R Touring, 2.5i, 2.5i Limited, 2.5i Premium, 2.5i Sport, 2.5i Touring | 2.4L H4 DIT, 2.5L H4 DI
View related parts
Subaru Legacy CANISTER
Part Number: 42036AC020
Product Specifications
- Other Name: Vapor Canister
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1998-2004 Subaru Legacy | Baja, Baja-B, Baja-S, Base, Brighton, Cold Weather, Flat6, Flat6 L.L.Bean, GT, L, Limited, Out Back, Post, SUS, SUS Flat6, SUS Limited | 2.2L H4 (New EVAPO), 2.2L H4 Series, 2.5L H4, 2.5L H4 Turbo, 3.0L H6
View related parts
Subaru Legacy CANISTER
Part Number: 42036AA000
Product Specifications
- Other Name: Vapor Canister
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1990-1998 Subaru Legacy | Base, Brighton, GT, L, LS, LS-D, LS-I, Out Back, Post, SUS | 2.2L H4 , 2.5L H4
View related parts
Subaru Legacy CANISTER
Part Number: 42036FA030
Product Specifications
- Other Name: Vapor Canister
- Replaces: 42036FA020
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1996-1998 Subaru Legacy | Brighton, GT, L, LS, Out Back, Post, SUS | 2.2L H4 (New EVAPO), 2.5L H4
View related parts
Subaru Legacy CANISTER
Part Number: 42035AJ03A
Product Specifications
- Other Name: Vapor Canister
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 2010-2012 Subaru Legacy | 2.5GT Limited, 2.5GT Premium | 2.5L H4 Turbo
View related parts
Subaru Legacy CANISTER
Part Number: 42036AA040
Product Specifications
- Other Name: Vapor Canister
- Warranty: This genuine part is guaranteed by Subaru's factory warranty.
Fits the following Vehicles:
- 1991-1994 Subaru Legacy | Turbo

Subaru Legacy Vapor Canister

Our website stands as the go-to online destination for OEM Subaru Legacy Vapor Canister. With complete lines of genuine Subaru Legacy Vapor Canister available at unbeatable market prices, we ensure top quality, reliability, and durability. Each part comes backed by the manufacturer's warranty, reinforcing your trust in our offerings.

Subaru Legacy Vapor Canister Parts Questions & Experts Answers

CANISTER
42036AC020
Q: What is the responsibility of the Evaporative Emissions Control (EVAP) system,Canister Purge Valve,Fuel Tank Vent Valve and Vapor Canister and how to replace on Subaru Legacy?
A: A uniform Evaporative Emissions Control (EVAP) system running through Baja, Legacy and Outback models redirects fuel vapors to the intake manifold in operation. The system consists of fuel tank filler neck cap along with other elements such as the fuel cut valve and EVAP canister and drain filter and drain valve and fuel tank pressure sensor and pressure control solenoid valve and shut-off valve and vent valve and purge control solenoid valve which are primarily installed beneath the vehicle. The system controls fuel tank pressure through vapor storage until it ventilates into the intake manifold. The canister provides atmospheric air entry to avoid vacuum development during purging. During operation the diagnostic system monitors system leaks and the valves safeguard the system throughout fueling operations. When an EVAP line develops a kink the fuel tank filler neck cap includes a relief valve so vacuum formation stays prevented. The purge control solenoid valve needs replacement by accessing it under the intake manifold while the EVAP canister requires replacement at the rear of the vehicle. The drain valve together with the drain filter sits above the canister while the fuel tank pressure sensor exists above the inner CV joint boot. The pressure control solenoid valve installation occurs above the rear axle differential while the vent valve placement takes position on top of the fuel tank. To reach the shut valve mechanics need to detach the fuel filler neck pipe because this component is positioned at the top of the assembly.